Abstract
Conductive fillers are one of the key factors to determine the conductive and shielding properties of conductive polymer composites. Herein, an emulsion polymerization method was used to prepare soft polydimethylsiloxane (PDMS) microspheres. And the soft conductive fillers of Ag coated PDMS microspheres (PDMS@Ag) were fabricated by electroless plating technique. The EMI shielding sheets were further fabricated by mixing the soft PDMS@Ag fillers with liquid silicone precursor and curing agent, followed by rolling and heat curing process. The compression ratio of the EMI sheets with 66 wt% of PDMS@Ag is 51.2% at 40 psi. Moreover, the EMI shielding sheets present a high EMI shielding effectiveness (SE) value of ~120 dB with 66 wt% of PDMS@Ag fillers. Our work proved that the soft conductive fillers present great advantages in compression and EMI shielding performances of the conductive polymer composites, which has promising potential in electronic packaging applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.