Fabrication of porous PCL/elastin composite scaffolds for tissue engineering applications

Abstract

We present the development of a technique that enables the fabrication of three-dimensional (3D) porous poly(ɛ-caprolactone) (PCL)/elastin composites. High pressure CO 2 was used as a foaming agent to create large pores in a PCL matrix and impregnate elastin into the 3D structure of the scaffold. The effects of process variables such as temperature, pressure, processing time, depressurization rate, and salt concentration on the characteristics of PCL scaffolds were determined. Scaffolds with average pore sizes of 540 μm and porosity of 91% were produced using CO 2 at 65 bar, 70 °C, processing time of 1 h, depressurization rate of 15 bar/min, and addition of 30 wt% salt particles. The PCL/elastin composites were then prepared under different conditions: ambient pressure, vacuum, and high pressure CO 2. The fabrication of composites under vacuum resulted in the formation of nonhomogenous scaffolds. However, uniform 3D composites were formed when using high pressure CO 2 at 37 °C and 60 bar.