Abstract
Arrays of polypyrrole nanorods were fabricated using an anodized aluminum oxide (AAO) template for use as supercapacitors. Gold was deposited on one side of the AAO template by thermoevaporation for use as an electrode and pyrrole was electrochemically polymerized, causing it to grow from the gold electrode into the AAO template. The length of the PPy nanorods was controlled by adjusting the applied charge, and nanorods with three different lengths were prepared: 1.2 microm for 0.5 C x cm(-2), 2.4 microm for 1.0 C x cm(-2), and 4.6 microm for 2.0 C x cm(-2). After the removal of the AAO template in alkali solution, a well-arranged polypyrrole (PPy) nanorod electrode structure having an extremely large surface area was produced. The morphology of the PPy nanorods was monitored by SEM. The capacitive performances of the PPy nanorod array electrodes were investigated by cyclic voltammetry (CV) as well as the galvanostatic charge/discharge test. Greatly enhanced capacity performance was observed in the nanorod electrodes. Also, a higher specific capacitance was observed in the longer nanorod electrode having a larger surface area.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.