Abstract
In this study, we found the simple and quick dry transfer method to fabricate a paper-based electrode for flexible printed circuit board (PCB). The conventional Ag nanoparticle (AgNP) suspension with high solid contents above ∼50 wt% was confirmed to be deposited on a super hydrophobic polyethylene terephthalate (SHP-PET) substrate without a special ink formulation or surface treatment of substrate. The AgNP layer on the SHP-PET was able to be transferred only onto the toner-printed region of the paper substrate during a simple lamination process, thereby realizing the patterned AgNP conductive lines on the paper substrates The AgNP/toner/paper electrodes were highly robust, showing no deterioration in conductivity after taping for 100 times. Moreover, the AgNP/toner/paper electrodes successfully functioned as flexible electrodes; thus, light emitting diodes connected to the AgNP/paper electrodes could be operated under folding deformation without significant loss of brightness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
