Abstract
Acrylic pressure–sensitive adhesives (PSAs) with 2-phenoxy ethyl acrylate (PEA) were polymerized using UV-curing technology. This study examined the effects of PEA content and UV dose. The photo-polymerization behavior of the pre-polymer was examined by viscosity measurements, real-time Fourier transform infrared spectroscopy, and photo-differential scanning calorimetry. The curing behaviors of the acrylic PSAs were investigated by shrinkage test, a modular advanced rheometer system, and gel content. differential scanning calorimetry and Advanced Rheometric Expansion System were used to characterize the acrylic PSAs. Adhesion performances were measured by probe tack, peel strength, and shear adhesion failure temperature. The optical properties of acrylic PSAs were examined by UV–visible spectroscopy and prism coupler. The PEA content had a larger effect on improving the optical properties, than did the UV dose. The transmittances of the acrylic PSAs with <75% PEA were >95%. The refractive indices of the acrylic PSAs increased with increasing PEA content, due to its high refractive index, >1.5, which affected the overall refractive indices, particularly in the visible region.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
