Abstract
Abstract Polyphenylsulfone (PPSU) based asymmetric hollow fiber membranes were prepared by the addition of different percentages of ZSM-5 particles by diffusion induced phase separation method. Polyvinylpyrrolidone (PVP) was used as a pore forming agent. The fabricated membranes were characterized by Field Emission scanning electron microscopy (FESEM), Energy Dispersive Spectroscopy (EDS), contact angle, water permeability, water uptake and by porosity measurements. Membranes filtration study was performed using different proteins namely bovine serum albumin (BSA), egg albumin (EA) and hazardous dyes like Reactive black 5 (RB-5), Reactive orange 16 (RO-16) in aqueous solutions. It was found that, addition of ZSM-5 in membrane matrix showed better dye removal capacity because of its hydrophilic and adsorptive nature. The membrane (PZ-3) with higher loading of additive exhibited rejection percentages of 100% for BSA, 95.23% for EA proteins and with reactive dyes 90.81% for RB-5 and 82.84% for RO-16 as compared to the pristine HF membrane.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Taiwan Institute of Chemical Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
