Abstract
This study investigated the separation performance of a hollow fiber nanofiltration membrane, which was fabricated from poly(m-phenylene isophthalamide) (PMIA) using a dry-jet wet spinning technology, for sustainable water recovery from water containing trace amount of perfluorooctane sulfonate (PFOS) that was a persistent organic pollutant commonly existed in water. SEM spectra indicated that the cross section of the hollow fiber membrane had an asymmetrical structure that consisted of a dense outer surface acting as a selectively layer, a spongy-like transition layer, and finger-like microvoids close to the inner surface. The average pore size and molecular weight cut-off, which were estimated using the solute rejection method, were 0.404nm and 904Da, respectively. The PFOS rejection experiments were carried out at the trans-membrane pressures ranging from 4×105Pa to 1.0×106Pa and PFOS concentrations from 50μg/L to 500μg/L. In all cases, the PFOS rejections were found to be increased as the PFOS concentration increased. The impact of the pH value and Ca2+ concentration of the feed solution on the PFOS rejections was studied in detail. The PFOS rejections improved from 91.17% to 97.49% with an increase in pH from 3.2 to 9.5 at 4×105Pa. An increase of Ca2+ concentration from 0.1mM to 2mM enhanced PFOS rejection from 97.10% to 99.40% at a trans-membrane pressure of 4×105Pa. The sorption/desorption experiments indicated that the amount of PFOS adsorbed on the membrane surface was five times higher in the presence of Ca2+ (2mM). AFM experiments also demonstrated that the membrane surface was rough with the addition of Ca2+. Hence, the presence of Ca2+ enhanced the PFOS adsorption in the membrane surface and caused more pore blockage of the membrane. As such, the declination in the water flux and augmentation in the PFOS rejection were observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.