Abstract
This study attempted to harness the dual benefit of adsorption and photocatalytic degradation for efficiently removing a model anionic azo dye, Orange G, from an aqueous solution. For this purpose, a series of bifunctional nanohybrids containing different proportions of naturally occurring biopolymer chitosan and ternary photocatalyst made of kaolinite, TiO2, and ZnO were prepared through the dissolution of chitosan in acid and subsequent deposition on ternary photocatalyst. The characterization through Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray spectrum (EDS) have confirmed the successful fabrication of nanohybrids from TiO2 and chitosan. The adsorptive separation of Orange G from the aqueous solution and subsequent degradation under solar irradiation was thoroughly studied by recording the λmax value of dye in the ultraviolet–visible (UV-Vis) spectrophotometer at various operating conditions of pH, dye concentration, contact time, and compositional variation. The nanohybrid (TP0.75CS0.25) fabricated from 75% ternary photocatalyst (w/w) and 25% chitosan (w/w) removed 97.4% Orange G within 110 min at pH 2.5 and 10 mg/L dye concentration. The relative contribution of chitosan and ternary composite on dye removal was understood by comparing the experimental results in the dark and sunlight. Recyclability experiments showed the suitability of the nanohybrid for long-term repeated applications. Equilibrium experimental data showed a better correlation with the Langmuir isotherm and pseudo-second-order kinetic model. The rapid and nearly complete removal capacity, long-term reusability, and simple fabrication technique make this novel nanohybrid a promising advanced material for removing hazardous azo dyes from industrial effluents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.