Abstract
Two-dimensional MXene has structural advantages in electromagnetic wave scattering due to its layered structure, but MXene materials can lead to impedance mismatch problems due to their high dielectric constants, so it is still a challenge to design highly efficient wave-absorbing materials based on MXene with low reflection loss, thin thickness, and wide absorption frequency. In this study, composite wave-absorbing materials were fabricated from Co–Co PBA precursors and MXene using liquid nitrogen flash freezing and freeze-drying techniques. By treating MXene and the PBA precursor at a high temperature of 750 °C, a rich heterogeneous interface was formed between Co@C and MXene (CCM7), and the impedance matching was optimized to improve the reflection loss capability. The optimized sample has an effective absorption bandwidth of 4.1 GHz at 2.5 mm covering the entire X-band with a minimum reflection loss of −61.42 dB. It is also demonstrated that CCM7 is satisfactory for Radar Cross-Section of flat panels and unmanned aerial vehicles by CST calculations, and this work provides a fresh perspective on the use of effective MXene composites for microwave absorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
