Fabrication of modified electrode by reduced graphene oxide (rGO) and polyaniline (PANI) for enhancing azo dye decolorization in bio-electrochemical systems (BESs)

Abstract

Bio-electrochemical systems (BESs) have attracted wide attention in the field of wastewater treatment owing to their fast electron transfer rate and high performance. Unfortunately, the low electro-chemical activity of carbonaceous materials commonly used in BESs remains a bottleneck for their practical applications. Especially, for refractory pollutants remediation, the efficiency is largely limited by the cathode property in term of (bio)-electrochemical reduction of highly oxidized functional groups. Herein, a reduced graphene oxide (rGO) and polyaniline (PANI) modified electrode was fabricated via two-step electro-deposition using carbon brush as raw material. Benefiting from the modified graphene sheets and PANI nanoparticles, the rGO/PANI electrode shows highly conductive network with the electro-active surface area increased by 12 times (0.013 mF cm−2) and the charge transfer resistance decreased by 92% (0.23Ω) comparing with the unmodified one. Most importantly, the rGO/PANI electrode used as abiotic cathode achieves highly efficient azo dye removal from wastewater. The highest decolorization efficiency reaches 96 ± 0.03% within 24 h and the maximum decolorization rate is as high as 20.9 ± 1.45 g h−1·m−3. The features of improved electro-chemical activity and enhanced pollutant removal efficiency provide a new insight toward development of high performance BESs via electrode modification for practical application.