Abstract
In the present study, micro-channels and micro-dimples are fabricated with different dimensions on the surface of SS-304 alloy by pulsed Nd:YAG laser beam micro-machining. The effect of various laser parameters on the machining performance characteristics is evaluated. The effect of process parameters viz. laser scanning speed, current, laser pulse frequency and pulse duration are studied using argon gas. The width or diameter and depth of micro-features are considered as the output responses. 3D laser surface profilometer is used to study and measure the dimensions of fabricated micro-features. The results showed that the selection of micro-feature size is critical to achieve desired machining results. All the processing parameters have noticeable effect on the geometry and quality of micro-features. The dimensions (diameter, width and depth) of micro-features are decreased with higher scanning speed and increased with increase in pulse frequency, pulse duration as well as current. The appropriate combination of parameters can yield the better results for quality and size of micro-features. Lower scanning speed with higher pulse frequency with a proper set of current and pulse duration can be used in order to fabricate micro-channel, whereas higher scanning speed and lower pulse frequency can be used to obtain micro-dimples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Additive and Subtractive Materials Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
