Abstract
This study presents a low-cost hybrid fabrication process that produces micro-holes of less than 200 μm in diameter. First of all, a micro-EDM hole-drilling is employed to perforate micro-holes through the mirror-like substrate (SUS304), which is cylindrical in shape. The oily wax also known as “sacrificial material” is extruded and formed onto the SUS304 substrate, resulting in a precision cylindrical micro-wax pillar mould. A precision electroforming is then conducted to deposit a thick nickel metal layer onto the substrate, and subsequently the wax mould is completely removed and revealed a perforated micro-hole array after releasing from the substrate. Experimental results show that the wax mould has an excellent duplication capability. The finished micro-hole array has an average hole-diameter of 165.3 μm and demonstrates ideal geometric accuracy. The proposed approach can significantly cost down and contribute to the precision machining industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
