Abstract
Lotus-type porous metals with low thermal conductivity are fabricated by continuous zone melting technique, which possess directional elongated pores. The porous metals have been able to be fabricated through the conventional casting method by utilizing the solubility gap between solid and liquid in pressurized gas atmosphere. However, there is a shortcoming that the pores are coarsened in the part farther from the chill plate in the ingot. In order to overcome such a shortcoming, we developed the continuous zone melting technique and successfully produced the lotus-type porous metals with even low thermal conductivity such as stainless steel and superalloys. Furthermore, from the viewpoint of mass production with low cost, we invented novel ”continuous casting technique”. The molten metals dissolving gas are solidified continuously by passing through the mold cooled with chiller and thus, lotus-type porous metal plate as long as one meter was produced for short time. Sufficient uniformity of the porosity and pore size was obtained in such long porous ingots. This technique is prospective method for commercial mass production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.