Abstract
We report a simple hybrid anodic method, with initial potentiostatic anodization followed by galvanostatic anodization, to grow much longer titania nanotube (TNT) arrays in a much shorter anodization period (t). The length of the TNT arrays (L) depends linearly on t and is controlled by the electric current; the growth rates are 5.3, 10.7 and 20.3 μm h−1 for current densities 3.7, 5.6 and 7.5 mA cm−2, respectively. The produced TNT films of L = 15–57 μm sensitized with N719 dye were fabricated into devices for photovoltaic characterization. The NT-DSSC devices show systematically improved cell performance depending on L, reflecting the excellent intrinsic light-scattering property of the NT-DSSC devices to harvest increased sunlight with long TNT arrays. The great effective surface area inside TNT arrays has been shown to significantly increase the dye loading, which might help to enhance the cell performance of the device with co-sensitizing of different dyes for improved efficiency of light harvesting in the future. The best performance of the NT-DSSC device was achieved at L ∼ 30 μm with a spacer of similar thickness, giving JSC = 14.63 mA cm−2, VOC = 0.741 V, FF = 0.70, and η = 7.6%, which is unprecedented for a back-illumination DSSC.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
