Fabrication of liquid-free ionic conductive elastomer (ICE) from cellulose-rosin derived poly(esterimide) towards temperature-tolerant and solvent-resistant UV shadowless adhesive and sensor

Abstract

Recently, the utilization of the cellulose to fabricate the multifunctional materials with aim to replace the petroleum-based product, is receiving significant attentions. However, the development of cellulose-based multifunctional materials with high mechanical strength and temperature resistance is still a challenge. Herein, the intrinsic feature and property of cellulose and rosin were creatively employed to fabricate a novel cellulose-rosin based poly(esterimide) (PEI) by esterification reaction and imidization reaction, and the obtained cellulose-rosin derived PEI exhibits superior thermal stability. Then the as-prepared cellulose-rosin derived PEI was dissolved in polymerizable deep eutectic solvents (PDES) and in-situ formed the ionic conductive elastomer (ICE) with via UV-induced polymerization. These cellulose-rosin based ICE exhibited excellent mechanical properties, solvent resistance, and temperature tolerance. By adjusting the mass ratio of cellulose-rosin derived PEI and PDES, the as-prepared liquid-free ICE functions as UV shadowless adhesive and wearable sensors. The bonding strength of UV shadowless adhesive could 1.52 MPa, which could be applied to fix the broken glass toy models. Furthermore, wearable sensors based those ICE could monitor the large and subtle movements even under extreme environmental condition, such as being soaked in organic solvent (such as tetrahydrofuran) or at low/high temperature (−25 °C or 80 °C). This work opens a new avenue for the next-generation of multifunctional ICE.