Abstract
Zinc Selenide ceramic was successfully fabricated by spark plasma sintering in the study. The ZnSe raw powders were handled with two different methods such as grinding and planetary ball milling, respectively. The relative density, microstructure and transmittance of the ZnSe ceramic sintered under the same sintering parameter with two type powders was investigated. The results shown that the performance of the powder processed by ball milling was more effective than that by grinding. Furthermore, the maximum relative density can reach 99.8% when the ZnSe powder treated by ball milling were sintered at 950 oC for 30 min with the heating rate of 10 oC/min under 100 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.