Abstract
A novel nano-adsorbent zinc oxide impregnated graphene oxide/inulin (ZGI) was prepared for the investigation of the removal efficiency of enrofloxacin. Characterization of the nano-adsorbent was accomplished through Fourier transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDS, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The average crystallite size of nanomaterial (ZGI) calculated from XRD data was 14.82nm. The adsorption of enrofloxacin onto ZGI was performed in batch mode. The variables of adsorption process such as adsorbent dose, pH, contact time and initial concentration of enrofloxacin were optimized by Taguchi method to achieve the maximum removal efficiency. The optimum values of variables were: adsorbent dose=25mg, pH=7, contact time=60min and initial concentration=50mg/L. The maximum adsorption capacity and removal efficiency of the material for enrofloxacin were 317.83mg/g and 98.60%, respectively at 303K. Redlich-Peterson isotherm model was the best fitted among the various isotherm models based on highest R2 values (0.9978-0.9981) and lowest χ2 (3.43 ×10-4-2.00×10-3). Kinetic data followed pseudo-second order model (R2≥0.9974) more accurately as compared to pseudo-first order model (R2≤0.9772). The adsorption mechanism was illustrated on the basis of XPS and Raman studies. Reusability investigation showed that the nano-adsorbent ZGI could be used up to 5 adsorption-desorption cycles with greater than 90% removal efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have