Abstract
In this work, the fabrication of gradient periodic line‐like structures with continuously changing spatial period on stainless steel by means of two‐beam direct laser interference patterning (DLIP) is studied. A 70 ps (picosecond [ps]) pulsed laser operating at 532 nm wavelength and 0.64 J cm−2 laser fluence is used to produce the gradient microstructures. By continuously changing the overlapping angle between the sub‐beams, the spatial period of gradient structures smoothly increases from 2.01 ± 0.09 to 3.99 ± 0.12 μm within a 500 μm long processed area. Different pulse‐to‐pulse overlaps are applied to study the influence of cumulated fluence on the topography of gradient structures. The surface topography is analyzed by optical confocal microscopy and is characterized by the roughness parameters Ra and Rz. Fourier transformations of the confocal images allows the verification of the variations of the spatial periods. In the experiments performed in this work, design rules are provided for fabricating complex microstructures in the future using DLIP‐based technology to achieve advanced surface function like anisotropic wetting or cell growth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
