Abstract
Fabrication process of electrophoretic display panels was investigated by utilizing transparent soft mold press, which enables to guide uniform packing of charged TiO2particles and colored particles for color e-Paper display. For this process, transparent soft mold was prepared by reacting silicone solution(silicone prepolymer/curing agent = 10/1 wt./wt.)into the base mold. While pressed with the transparent soft mold under 1.5 ∼ 3.0 Kgf/cm2of pressure at 60 ∼ 90°C, the photosensitive film was exposed to UV light at 365 nm in the range of 800 ∼ 2,000 mJ/cm2. The transparent soft mold was demolded by rolling up to give electrophoretic display panels with precise geometry. The process of obtaining colored electrophoretic display was also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
