Abstract
The polymer foam coated with zero-valent copper (Cu0) was designed and prepared for the removal of hexavalent chromium (Cr(VI)) in water. Firstly, porous poly(tert-butyl acrylate) was fabricated by concentrated emulsion polymerization and then acrylic acid groups were generated on the surface of foam by hydrolysis reaction. Secondly, with the help of the large amount reactive carboxylic acid groups, polyethyleneimine (PEI) were chemically grafted onto the surface by the reaction between amine group and acrylic acid group. Finally, zero-valent copper was reduced by sodium borohydride (NaBH4) and coated on the surface of polymer foam. Thus the copper functionalized porous adsorbent (Cu0–PEI–PAA) was constructed, and then applied for removing Cr(VI) from aqueous solution. The removal mechanism of Cr(VI) involved redox reaction by zero-valent copper and adsorption by amine groups, simultaneously. As a result, 99.5% of Cr(VI) could be removed within 2h, and the maximum removal capacity for Cr(VI) of Cu0–PEI(1800)–PAA was 9.16mg/g. Furthermore, the effect of initial concentration of Cr(VI), pH value, and temperature on the Cr(VI) removal was investigated. Therefore, the as-prepared zero-valent copper-loaded polymer foam could be an efficient and promising remediation material to remove Cr(VI) from wastewater.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
