Abstract
We attempted to fabricate a composite coating comprising bioactive calcium and sodium titanates on titanium (Ti) using a calcium hydroxide (Ca(OH)2) slurry containing sodium ions (Na+). The coating procedure was as follows: a Ti substrate was buried in the slurry, which was prepared by mixing Ca(OH)2 powder with NaOH and/or NaCl solution, and the slurry was then heated at 923K in air. This procedure resulted in the formation of a composite coating comprising CaTiO3 and Na4Ti5O12 with a thickness of ca. 430nm on the substrate. When the composite coating was soaked in a simulated body fluid, calcium phosphate precipitated on the surface more rapidly than on a monolayer of CaTiO3. It is likely that dissolved Na+ from the coating promoted the formation of the calcium phosphate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
