Fabrication of coconut shell activated carbon filter system for removal of colour and pollutants in textile dye effluent

Abstract

The present study evaluates the Decolorization and pollutant removal efficiency of chemically impregnated coconut shell-activated carbon using textile dye effluent in the filtration system. The coconut shell zinc chloride activated carbon (CSZAC) was used as a filtering media in wastewater treatment due to its wider pore space with better surface area (590.80 m2 g−1) and higher adsorption capacity. The SEM micrograph revealed that the activated carbon had networks of parallel running pores with internal microstructure and more active sites. The designed activated carbon filter system has dimensions of 90 x 60 x 30 cm; the sections included are the holding tank (50 liters capacity), filtration tank and storage tank with the optimized flow rate of 5 x 10−4 m3 min−1. The Color, pH, EC, TDS, TSS, BOD and COD of textile dyeing wastewater were significantly reduced, after the treatment through the CSZAC filtration system. The initial color concentration of textile dye effluent was 7021 HU and after treatment, the color was fully reduced and became colorless. CSZAC treatment reduced the BOD from 600 mg L−1 to 89.7 mg L−1 (80.6 per cent) and COD from 2500 mg L−1 to 205 mg L−1 (90.5 per cent). Therefore, CSZAC can be used as an effective adsorbent material to remove different dye compounds and pollutants from textile wastewater.