Abstract
In this report, we synthesized novel Co–Zn co-doped stannate (CoxZn1-xSnO3) hollow balls via an ion co-precipitation method. The as synthesized CoxZn1-xSnO3 exhibited excellent dielectric and magnetic properties, which were conducive to the microwave absorption. We also embedded the as prepared CoxZn1-xSnO3 nanoparticles into rGO 3D aerogels (rGO@CoxZn1-xSnO3) to enhance their microwave absorbability. Several characterization techniques were utilized to investigate the structures, morphologies, compositions and specific surface areas of the CoxZn1-xSnO3 and rGO@CoxZn1-xSnO3 aerogels respectively. In addition, associated electromagnetic parameters of various as prepared samples were also measured to simulate the microwave absorbability of the 3D rGO@CoxZn1-xSnO3 aerogels. The simulation results indicated that the maximum reflection loss (RLmax) of rGO@Co0.7Zn0.3SnO3 could reach up to −38 dB at 10.6 GHz with an absorber thickness of only 3 mm. The maximum efficient absorption bandwidth (EAB) of the rGO@Co0.7Zn0.3SnO3 hollow balls was over 8 GHz (from 10 GHz to 18 GHz) with an absorber thickness of only 3.5 mm. The enhanced performance was ascribed to high attenuation capability, reasonable impedance matching, multiple interfacial polarizations and proper synergistic effect. This work demonstrated that the rGO@CoxZn1-xSnO3 aerogels with light-weight and strong microwave absorbability have great potential to be used as a microwave absorber.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have