Abstract
Membrane-electrode assemblies (MEAs) have been fabricated with a direct coating of the catalyst slurry by a doctor blade method on the pre-swollen Nafion membrane for proton exchange membrane (PEMFC) and direct methanol fuel cells (DMFC). The effects of various swelling agents with different boiling points such as ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), tetraethylene glycol (TEEG), and glycerol in the swelling step of the membrane and the drying step of the coated catalyst have been investigated. Also, the use of dimethyl sulfoxide (DMSO) as a dispersing agent in the catalyst slurry has been investigated. Among the various swelling agents investigated, EG gives the best results with the dispersing agent DMSO offering further improvement. The MEAs fabricated with the EG-swollen membranes and DMSO as a dispersing agent in the catalyst layer show good performance in single fuel cells with hydrogen and methanol fuels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.