Abstract
The fabrication of AlN-SiC-TiB2 ceramics with powder mixtures of Al, 6H-SiC and TiB2 was investigated by self-propagating high temperature synthesis (SHS) and hot isostatic pressing (HIP). The powder mixtures were shaped by isostatic cool pressing method and the combustion reaction was carried at the pressure of 100-200 MPa N2 by an ignitor. The compositions and morphologies of the combustion product were studied by XRD and SEM. The determined bending strength and the fracture toughness of the ceramics were 350 MPa and 3.5 MPa⋅m1/2 respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.