Abstract
The authors proposed a method to fabricate field emitter arrays with uniform apex diameters in tens of nanometer scale based on the molding technique and apply it to fabricate molybdenum field emitter arrays. Apex diameter equal to 23±5nm was observed in a 6×6 tip array by high-resolution scanning electron microscope. They also studied the field-emission characteristics in devices with gate electrodes fabricated on top of the arrays by a self-aligned process. In single-gate devices, emission current of up to 20μA per tip with negligible gate leak current was observed. The gate-fabrication process was extended to fabricate double-gated emitters. Further optimization of the fabrication process for higher emission current, together with metallurgical and lithographic methods, is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.