Abstract
The Al/Ni magnetic core–shell pigments were successfully synthesized in this study using the galvanic displacement method. A dense nickel shell was formed on the surface of a flake Al pigment (Al:Ni2+ = 1:0.5), resulting in a decrease in its lightness by 9 units while only slightly increasing the average infrared emissivity by 0.1 compared with the uncoated flake Al pigments. And it also exhibited soft magnetic characteristics, with a saturated magnetization value of 4.5 emu/g. Moreover, the impact of Al/Ni core-shell pigments on the infrared-radar stealth performance of the target was investigated based on the structure of “low-emissivity coating (LEC) + radar absorbing coating (RAC)”. The results showed that the emissivity of Al/Ni composite coatings maintained a low infrared emissivity (ε ≤ 0.23). The introduction of Ni shell improved the impedance matching between the Al/Ni coating and free space, allowing greater penetration of microwaves into the LEC and improving radar stealth performance of materials. The Al/Ni composite coatings (Al:Ni2+ = 1:0.5, the thickness of RAC:1.2 mm, and LEC: 60 μm) exhibited an extended effective absorption bandwidth (Reflection loss (RL) ≤ −10 dB) from 2.6 to 4.25 GHz and an enhancement of the average RL from −6.43 to −7.1 dB in the range of 2–18 GHz compared to the RAC. Consequently, the Al/Ni magnetic core–shell pigments can be used as novel low-emissivity pigments for infrared-radar compatible stealth research.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
