Fabrication of a Multi-Functional Separator Incorporating Crown ether- Polyoxometalate Supramolecular Compound for Lithium-Sulfur Batteries.

Abstract

Recently, research on polyoxometalates (POMs) has gained significant momentum. Owing to their properties as electronic sponges, POMs catalyst harbor substantial potential in lithium-sulfur battery research. However, POMs undergo a transformation into reduced heteropoly blue (HPB) during electrochemical reactions, which then dissolve into the electrolyte, resulting in catalyst loss. In this research, we amalgamated 18-crown-6 (CR6) with K3PW12O40, (KPW), synthesized a novel POM-based supramolecular compound, and integrated it with graphene oxide (GO) to fabricate a multi-functional composite polypropylene (PP) separator KPW-CR6/GO/PP. The crown ether array was employed to immobilize POM and construct ion transport channels, thereby enhancing the Li+ migration rate and capturing polysulfides. Subsequently, leveraging the stable structure and redox properties of POM, the polysulfide is catalyzed to transform and inhibit the shuttle effect, thereby protecting the Li anode. The lithium-sulfur batteries with the Crown ether-POM supramolecular compound separators, exhibit enhanced capacity and stability (1073.3 mAh g-1 at 1.0 C, and 81.5 % retention rate after 250 cycles). The battery (S loading: 3.2 mg cm-2) presents an initial specific discharge capacity of 543.4 mAh g-1 at 0.5 C, with 89.8 % of the capacity retained after 160 cycles. This underlines the practical application potential of Crown ether-POM supramolecular materials in Li-S batteries.