Abstract
For a valve to be fabricated seamlessly into an artificial heart (AH) blood pump, a jellyfish valve has been developed, in which a thin membrane is fixed at the center of a valve seat having several spokes to protect against prolapse of the membrane. The valve is superior in performances to a Björk-Shiley valve, and reveals good blood compatibility. The valve would be very useful not only for AH animal study, but for future clinical use in infants to adults. Several institutions are already trying the valve. In this paper, the fabrication of the jellyfish valve is introduced, and in vitro and in vivo results summarized. A computer aided design (CAD) system was developed to cut a male wax mold of the valve seat. The input parameters to the CAD are diameter, height, thickness of rim, number of spokes, width and thickness of spokes, etc. Jellyfish valves with diameters of 4 to 27 mm have already been fabricated for many types of AHs and assist pumps.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: ASAIO journal (American Society for Artificial Internal Organs : 1992)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.