Fabrication of a dual-focus artificial compound eye with improved imaging based on modified microprinting and air-assisted deformation.

Abstract

Natural compound eyes inspire the development of artificial optical devices that feature a large field of view and fast motion detection. However, the imaging of artificial compound eyes dramatically depends on many microlenses. The single focal length of the microlens array significantly limits the actual applications of artificial optical devices, like distinguishing objects at different distances. In this study, a curved artificial compound eye for a microlens array with different focal lengths was fabricated by inkjet printing and air-assisted deformation. By adjusting the space of the microlens array, secondary microlenses were created between intervals of the primary microlens. The diameter/height of the primary and secondary microlens arrays are 75/25µm and 30/9µm, respectively. The planar-distributed microlens array was transformed into a curved configuration using air-assisted deformation. Compared with adjusting the curved base to distinguish objects at different distances, the reported technique features simplicity and is easy to operate. The applied air pressure can be used to tune the field of view of the artificial compound eye. The microlens arrays with different focal lengths could distinguish the objects at different distances without additional components. When the external objects move a small distance, they can be detected by the microlens arrays due to their different focal lengths. It could effectively improve the motion perception of the optical system. Moreover, the focusing and imaging performances of the fabricated artificial compound eye were further tested. The compound eye combines the advantages of monocular eyes and compound eyes, holding great potential for developing advanced optical devices with a large field of view and automatic variable-focus imaging.