Abstract
Hierarchical one-dimensional SnO2 nanofibers (NFs) consisting of nanoparticles (NPs) have been synthesized and employed as an efficient light scattering layer to fabricate double layered dye-sensitized solar cells (DSSCs). The photovoltaic performance (5.44%) of the DSSC based on the SnO2 NPs (14.5 μm)/NFs (4.0 μm) double layered photoanode showed a 26.3% enhancement compared to that of a SnO2 NPs photoanode (18.5μm, 4.30%). Intensity modulation photocurrent spectroscopy (IMPS), intensity-modulated voltage spectroscopy (IMVS) and open-circuit voltage decay (OCVD) spectroscopy were used to investigate the kinetic process of electron transport and recombination within SnO2 NPs or NPs/NFs based DSSCs, revealing a faster electron transport rate and a lower recombination rate in the SnO2 NPs/NFs photoanode. The UV-vis diffuse reflectance spectroscopy results showed that the SnO2 NPs/NFs possess better light scattering ability which enhanced their photovoltaic performance compared to the SnO2 NPs. Furthermore, an overall power conversion efficiency of 6.31% (with a Jsc of 16.78 mA cm−2, Voc of 711 mV and FF of 0.53) was achieved for the SnO2 NPs/NFs double layered photoanode with an additional SnO2 blocking layer, which suppressed electron recombination between the FTO glass and the electrolyte.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.