Abstract
The formation of biodegradable implants for use in osteosynthesis has been a major goal of biomaterials research for the past 2-3 decades. Self-reinforced polylactide systems represent the most significant success of this research to date, however, with elastic constants up to 12-15 GPa at best, they fail to provide the initial stiffness required of devices for stabilizing fractures of major load-bearing bones. Our research has investigated the use of calcium polyphosphate (CPP), an inorganic polymer in combination with polyvinyl-urethane carbonate (PVUC) organic polymers for such applications. Initial studies indicated that composite samples formed as interpenetrating phase composites (IPC) exhibited suitable as-made strength and stiffness, however, they displayed a rapid loss of properties when exposed to in vitro aging. An investigation to determine the mechanism of this accelerated in vitro degradation for the IPCs as well as to identify possible design changes to overcome this drawback was undertaken using a model IPC system. It was found that strong interfacial strength and minimal swelling of the PVUC are very important for obtaining and maintaining appropriate mechanical properties in vitro.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Biomedical Materials Research Part B: Applied Biomaterials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.