Abstract
AbstractWe fabricated 6,13‐bis(triisopropylsilylethynyl)–pentacene (TIPS–pentacene) thin film transistors using a direct metal transfer method. Using different metals, such as Au and Ag ink, electrode patterns are formed from the relief region of the polymer mold. TIPS–pentacene TFTs using the Ag ink transfer method show a similar performance to those using the Au metal transfer method. This method has advantages over the Au metal transfer method because it does not require vacuum equipment and a dry etching process. The self‐assembled monolayer (SAM) treated device exhibits a carrier mobility of 9.5 × 10–2 cm2/V · s, and an on/off ratio of 4.6 × 104. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: physica status solidi (RRL) – Rapid Research Letters
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
