Abstract
Multiporous-Layered-Electrodes Perovsekite Solar Cells (MPLE-PSCs) shows high stability (for 7000 h at 100 degree C; for 10,000 h under 1-Sun irradiation, for 3,000 h at 85%RH-85 degree C), adequate efficiency (11.5% by large modules), and low cost by fully-printed fabrication systems. In oder to fabricate good modules of MPLE-PSCs, good techniques and knowledges should be gathered up for the commercialization. In this conference, our group will show the efforts for the cost-effective commercially-available fully-printed MPLE-PSCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have