Abstract
CdS and CdSe quantum dot-sensitized solar cells (QDSSCs) were used for the study of determining the optimum preparation parameters that could yield the best solar cell performance. The quantum dots (QDs) were coated on the surface of mesoporous TiO2layer deposited on FTO substrate using the successive ionic layer adsorption and reaction (SILAR) method. In this method the QDs are allowed to grow on TiO2by dipping the TiO2electrode successively in two different solutions for predetermined times. This method allows the fabrication of QDs in a facile way. Three preparation parameters that control the QD fabrication were investigated: concentration of precursor solutions, number of dipping cycles (SILAR cycles), and dipping time in each solution. CdS based QDSSC showed optimum performance when the QDs were prepared from precursor solutions having the concentration of 0.10 M using 4 dipping cycles with the dipping time of 5 minutes in each solution. For CdSe QDSSC, the optimum performance was achieved with QDs prepared from 0.03 M precursor solutions using 7 dipping cycles with 30 s dipping time in each solution. The QDs deposited on TiO2surface were characterized using UV-vis absorption spectroscopy, FESEM, and TEM imaging.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
