Abstract
Polycaprolactone (PCL) is widely used in the fabrication of nanofibers through electrospinning technique. PCL is a biodegradable material that is economical, simple and can be scaled up for industrial production. In this study, PCL was infused with selenium nanoparticles (SeNPs) via electrospinning to fabricate PCL-SeNPs nanofiber. Field emission scanning electron microscopy (FESEM) images of the samples revealed ‘aligned fibers’ was successfully fabricated with a diameter size of less than 350 nm and an average diameter of 185 nm. The presence of Se in the nanofiber was confirmed by energy dispersive X-ray analysis (EDX) and Raman spectra. Based on the X-ray diffraction (XRD) pattern, the structure of PCL did not change and remains in the PCL-SeNPs nanofibers. The functional groups of PCL, as indicated by infrared (IR) spectra remained the same after SeNPs infusion. These results demonstrated that the physical and chemical properties of PCL nanofibers were not affected by the infusion of SeNPs. In addition, the hydrophobicity of the PCL decreased slightly in the presence of SeNPs. The first month after degradation, disorganized and fibrous fibers of PCL-SeNPs nanofiber were observed followed by the formation of large fiber clumps as degradation time increased. An agglomerated SeNPs made PCL-SeNPs nanofiber pores looser and easier to be hydrolyzed after 4 months of degradation. The sticky surface of PCL-SeNPs nanofiber shows acceleration in the hydrolysis process after 24th weeks of degradation. The presence of SeNPs enhanced the degradation behavior as well as reducing the degradation time to break into pieces, starting after 6 months of degradation. The ‘aligned’ PCL-SeNPs nanofiber, which can mimic the natural tissue extracellular matrix (ECM) morphology, can potentially be used in biomedical applications such as tissue engineering, wound dressing, biomedicine, sensor and filtration application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Malaysian Journal of Fundamental and Applied Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.