Abstract
The interphase is vital for optimizing the mechanical properties of fiber-reinforced B4C ceramics. In this study, the TiB2 interface composed of one or several layers of fine TiB2 grains was in-situ formed between B4C and SiC fibers by introducing Ti3SiC2-coated SiCf into B4C matrix. The TiB2 interface not only obviously reduced the densification temperature of the B4C ceramics, but also enhanced the mechanical properties. The micro-mechanics modeling was performed to investigate the weak interphase and thermal residual stress distribution induced by TiB2, where the stress tend to deflect or propagate at the fiber-matrix interface, compared to B₄C-SiCf ceramics. The particle toughening inside the TiB2 interface layer and stress transfer at the weak interface were identified as the major factors for the improvement of fracture toughness in this system. These results provide valuable guidance for improving the comprehensive performance of B4C-SiCf ceramic composites by interface regulation in future investigations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.