Abstract
This study reports on the fabrication and thermo-physical properties evaluation of ethylene glycol (EG) based heat exchange fluids containing molybdenum disulfide nanoparticles (MoS2 NPs) and micrometer sized particles (MPs). For this purpose, MoS2 NPs and MPs (with average size of 90nm and 1.2μm; respectively) were dispersed and stabilized in EG with particle loading of 0.25, 0.5, 1wt%. To study the real effect of MoS2 NP/MP the use of surfactants was avoided and ultrasonic agitation was used for dispersion and preparation of stable MoS2 NFs/MFs. The objectives were investigation of impact of MoS2 particle size (including NP/MP) and particle loading on thermo-physical properties of EG based MoS2 NFs/MFs including thermal conductivity (TC) and viscosity of NFs/MFs at 20°C. All suspensions (NFs/MFs) exhibited a higher TC than the EG as base liquid and NFs showed higher TC enhancement values than the MFs. A TC enhancement of 16.4% was observed for NFs containing 1wt% MoS2 NPs while the maximum increase in viscosity of 9.7% was obtained for the same NF at 20°C. It indicates this NF system may have some potential to be utilized in heat transfer applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Communications in Heat and Mass Transfer
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
