Abstract
Fluorinated ethylene propylene (FEP) film is an attractive candidate for mitigating target debris in high-power laser systems due to its remarkable advantages such as low cost, low absorption, and high damage threshold. However, the inert surface with bad wettability presents an enormous challenge to realize optical antireflection. In this Letter, we experimentally demonstrate that broadband antireflection of FEP film can be achieved through combining oxygen plasma treatment and solgel coating techniques. By optimizing the plasma treating time and withdrawal rate during the coating process, the treated FEP film has 4.7% enhanced transmittance compared to the untreated sample. In this case, transmittance over 99% with wide wave bands ranging from 600 to 950nm is achieved. The mechanism of broadband antireflection was revealed by investigating the fluorocarbon groups on the FEP surface. The applicable wave band of antireflective FEP film can be designed at will by changing plasma-treating conditions, which could open up a new avenue in the field of laser debris mitigation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.