Abstract
Activated carbon, zeolite and titanium dioxide are wildly used for removing the organic compounds in waste water. Although, these materials exhibit high performance (in powder form), reclaiming of these materials from the waste water treatment system is still hard. The objective of this study is to fabricate hollow cylinder activated carbon-zeolite samples which were used as a porous substrate. Various ratios of activated carbon, zeolite NaA and clay were mixed with special binder to form dough before extruded to be hollow cylinder shape. The hollow cylinder samples were cut into 2.5 cm long and then were fired at 600 °C for 2 hours under 5%CO2+N2 atmosphere. The fired samples were dip-coated with TiO2-P25 and fired at 600 °C for 1 hour under 5%CO2+N2 atmosphere for testing the photocatalytic degradation of lignin solutions under UV light. The results showed that the strength of fired samples increasing with the ratio of clay increased. The XRD patterns of samples having clay addition showed peaks of zeolite and quartz. The physical properties, microstructure and photodegradation will be discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
