Abstract
This work reports on advances in capacitive humidity and strain sensor technologies through the development of state-of-the-art 3D-printed Interdigitated Electrodes (IDEs) coated with a unique GO/ PVA coating. These IDEs are constructed using a novel composite filament of MWCNTs and polylactic acid (PLA) that offer superior flexural strength and electrical properties compared to conventional polymer matrices.We show that the GO/ PVA coating appears to be sensitive over the full range of relative humidity (RH) from 0% to 100%, with a remarkable capacitance change of 300 pF/%RH. Fast response and recovery times of 60 and 42 s, respectively, have been measured outperforming existing works that utilize metal electrodes. Regarding temperature dependence, the coatings endure conditions ranging from ambient to −25 °C, even in the presence of ice. Furthermore, at 50% RH, the sensors are shown to achieve a maximum sensitivity of 34.2 within a strain range of up to 2%.In conclusion, this work represents a significant advancement in cutting-edge sensor technologies, offering unprecedented capabilities for humidity and strain sensing performance for a wide range of applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.