Abstract
ABSTRACTEpoxy film adhesives are of prime importance for the fabrication of lightweight honeycomb structures for aerospace industries. This work involves the synthesis of oxazolidinone modified epoxy novolac resin (EPN‐OXA) via the reaction of EPN and toluene diisocyanate. EPN‐OXA was characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, and epoxy equivalent weight. EPN‐OXA was blended with solid epoxy resin, polyethersulfone (PES) toughened liquid epoxy resin, dicyandiamide, and aluminum powder to fabricate a film adhesive curing at 170–180 °C. Effect of additives and curative on the adhesive property was studied to optimize the composition. Effect of PES on the optimized composition was studied in detail. The best composition exhibited lap shear strength of 370 ± 10 kgf cm−2 at 25 °C and the strength was retained to 75% at −196 °C and 52% at 120 °C. PES significantly enhanced the interfacial strength at different temperatures (~1.6‐fold at −196 and 25 °C and ~1.8‐fold at 120 °C). It also improved tensile strength and fracture toughness by 1.4‐ and 2‐fold, respectively. The toughening effect of PES was further confirmed by scanning electron microscopy images. PES marginally reduced the glass‐transition temperature and it exhibited no effect on thermal stability. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47520.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
