Abstract
ABSTRACTWe present the development of a MEMS piezoelectric bimorph generator, a cantilever type bimorph which was formed by laminating two PZT piezoelectric layers. Our bimorph generator can scavenge mechanical energy from ambient vibrations and transform it into useful electrical energy. Two poling configurations of the PZT piezoelectric layers of our bimorph MEMS generator were fabricated and tested. A tip proof mass used for adjusting the resonance frequency was also demonstrated. Experimental results confirm that our device possessed a maximum open-circuit output voltage of 1.91VP-P and a 3.42VP-P for a parallel polarization device and a serial polarization device, respectively with a 2g externally applied vibration. At an optimal resistive load, the maximum output power was 1.548μ–W and 1.778μ–W for a parallel polarization device and a serial polarization device, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
