Abstract
Abstract Diode- and triode-type diamond field emitter arrays are fabricated using the transfer mold technique and self-align process. A size-inverted pyramidal mold of micron size is formed on (100) silicon substrate using conventional photolithography and anisotropic etching. A diamond film thicker than 100 μm is grown on the mold, which remains as a free-standing film of a diamond tip array after etching the mold. Silicon dioxide and molybdenum (Mo) layers are deposited conformally on the diamond tip array as an insulating and a gate layer, respectively. A flat photo-resist (PR) layer, whose thickness is thinner on the tip than the surrounding area, is then coated. The uniform removal of the PR layer exposes the apex of the tips while the rest of the surface is still covered with PR. The remaining PR layer around the tips acts as a mask for the etching of the Mo and silicon oxide layers over the diamond tips. As a result, a diamond emitter array with a Mo gate is fabricated. We also find that a proper treatment of the diamond tips with hydrogen can substantially improve the emission.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
