Abstract
Recently, we reported on the phenomena of the formation of the novel composite material based on titania nanotubes (TiO2 NTs) over-grown by thin boron-doped diamond (BDD) produced in microwave plasma enhanced chemical vapor deposition (MW PE CVD) [1,2]. Under microwave plasma treatment, the structure TiO2 NTs underwent transformation from stoichiometric anatase into non-stochiometric oxide with Ti(III) phase and some rutile phase arises. Furthermore, obtained material was characterized with a significantly enhanced conductivity and capacitance comparing to pristine titania. The electrochemical studies showed that the specific areal capacitance of TiO2/BDD raised up to 7.46 mF cm-2 whereas for the pure BDD it reached only 0.11 7.46 mF cm-2. Because of such strong modification of titania and application potential in energy storage devices we decided to initiate growth of boron nanocrystalline diamond (B-NDC) on the highly ordered TiO2 nanotube arrays. TiO2 NTs are fabricated via two-step anodization of titanium metal plate followed by a short immersion in diluted HF in order to remove any surface debris [3]. Titanium plate covered by uniform titania nanotube layer provides a large specific surface area as well as a direct pathway for charge transport, thus holding promising capabilities of being support for another materials deposition. Afterwards, similarly to formation of TiO2NTs/BDD material, the deposition of boron nanocrystalline diamond will be also realized under microwave plasma conditions and Ti/TiO2 NTs will act as a substrate. The morphology and the structure of obtained composite material will be investigated using scanning electron microscopy and Raman spectroscopy. Electrochemical activity will be identified applying cyclic voltammetry and electrochemical impedance spectroscopy techniques performed in aqueous electrolyte. The influence of boron-doping level will be observed as a change in registered capacitive current and impedance behaviour.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
