Fabrication and characterization of polysiloxane/polyacrylate composite latexes with balanced water vapor permeability and mechanical properties: effect of silane coupling agent

Abstract

In order to improve the water vapor permeability and mechanical properties of latex films, polysiloxane/polyacrylate (PSi/PA) composite latexes were fabricated via seeded emulsion polymerization of methyl methacrylate and butyl acrylate onto PSi latex particles, and the effects of the silane coupling agent 3-methacryloyloxypropyl trimethoxysilane (MATS) on the morphologies of the latex particles and films, as well as the microphase separation degree, the water vapor permeability and the mechanical properties of the latex films were investigated. Results indicated that MATS was essential for obtaining the PSi/PA composite latex particles with PSi as core and PA as shell and made a great contribution to restrict the phase separation. The PSi/PA core/shell latex films showed similar tensile strength and elongation with pure PA film, while exhibiting promising water vapor permeability. It was found that the influences of MATS content on the water vapor permeability and mechanical properties were opposite, and on the premise of the requirements for mechanical properties, lower MATS content could provide the PSi/PA core/shell latex films with better water vapor permeability.