Abstract
Polyethersulfone/carbon nanotubes (PES/CNTs) based mixed matrix membranes (MMMs) were prepared by phase inversion method for nanofiltration (NF) application. Carboxylated CNTs with different diameter and concentration were incorporated into the polymer matrix to enhance the performances of the NF membranes. The prepared PES/CNTs membranes were characterized and evaluated in terms of membranes morphology, structure, surface properties, and separation performances. Two types of CNTs with different diameters (20 and 40nm, marked as CNT1 and CNT2, respectively) were chosen to investigate the effect of CNT diameter on membrane performances. The effect of CNT concentrations (from 0.01 to 1wt%) was also tested by introduction of CNT2 in the MMMs. As a result, the MMMs embedded with CNT1 achieved better NF performances. When CNT2 concentration reaches 0.1wt%, the PES/CNT2 membranes obtained the highest water flux (38.91L/m2h) and Na2SO4 rejection (87.25%) at 4bar. The solute rejection was in a sequence of R(Na2SO4)>R(MgSO4)>R(NaCl).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
