Fabrication and characterization of n-ZnO/p-GaSb heterojunction diode

Abstract

PurposeThe purpose of this paper is to examine the growth and characterization of the two different compound semiconductors, namely, n-zinc oxide (ZnO) and p-gallium antimonide (GaSb). In this paper, fabrication and characterization of n-ZnO/p-GaSb heterojunction diode is analyzed.Design/methodology/approachThermo vertical direction solidification (TVDS) method was used to synthesize undoped GaSb ingot from high purity Ga (5N) and Sb (4N) host materials. Thermal evaporation technique is used to prepare a film of GaSb on glass substrate from the pre-synthesized bulk material by TVDS method. Undoped ZnO film was grown on GaSb film by sol–gel method by using chemical wet and dry (CWD) technique to fabricate n-ZnO/p-GaSb heterojunction diode.FindingsThe formation of crystalline structure and surface morphological analysis of both the GaSb bulk and film have been carried out by x-ray diffraction (XRD) analysis and scanning electron microscopy analysis. From the XRD studies, the structural characterization and phase identification of ZnO/GaSb interface. The current–voltage characteristic of the n-ZnO/p-GaSb heterostructure is found to be rectifying in nature.Originality/valueGaSb film growth on any substrate by thermal evaporation method taking a small piece of the sample from the pre-synthesized GaSb bulk ingot has not been reported yet. Semiconductor device with heterojunction diode by using two different semiconductors such as ZnO/GaSb was used by this group for the first time.