Abstract
Microelectromechanical systems (MEMS) capacitive switches discussed in this paper employ electrostatic actuation to perform switching. Capacitive switches employ inductive tuning for excellent switching characteristics in X and Ku bands. Employing inductive tuning is found to increase the switch beam inductance by a few tens of pico-henry. This enhances the Q factor and enables tuning of isolation over a narrow band of frequencies. Beam inductance can be extracted from the simulated isolation characteristics of the switch by curve fitting. This paper presents design, fabrication and characterisation of inductive tuned MEMS capacitive switches tuned for X and Ku bands. The devices are fabricated on high resistive (10 KΩ) silicon substrate by a five mask process. The characterisation of the fabricated devices are conducted using Cascade probe station and high frequency Power network analyser. Characterisation results show an actuation voltage of 18.5 volts. The insertion - loss and isolation are better than 0.5 dB and -40 dB respectively in the 8-18 GHz band.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Mechatronics and Automation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
