Abstract
In the present work it has been investigated the kinetic behavior of internal oxidation processes of strips of Ag-Cd/CdO materials fabricated by adding CdO particles (size of 5 and 20 μm) in liquid Ag-Cd alloys. It has been established the metallurgical mechanism that controls the formation of the thickness covered with CdO particles produced by internal oxidation of the Ag-Cd/CdO material. It has been developed, successfully, a metallographic preparation technique for characterizing the morphology, size and distribution of CdO particles produced by heat treatment of internal oxidation on the surface of each sample based on the distance from the original surface to the boundary of dispersed CdO particles. The material strips were sequentially roughed on its surface and the roughing thickness was measured in the cross section of each new surface to determine the number of particles per area and average particle size.
Highlights
El polvo de CdO utilizado en la fabricación del material Ag-X%Cd/CdO[15%VOL] se muestra en las imágenes de electrones secundarios de la Figura 1
El tratamiento térmico con atmósfera seca se realizó en una mufla de resistencias a 850 °C colocando muestras de 10 × 10 × 2 mm de los materiales fabricados
Solidification, structures, and properties of cast metal-ceramic particle composites
Summary
El material empleado para la fabricación del contactor eléctrico fue la aleación binaria Ag-Cd, la Ag en forma de granalla con una pureza nominal de 99.99% y el Cd con una pureza nominal de 99.99%. El material empleado como partículas de refuerzo fue CdO (óxido de cadmio) de dos tamaños diferentes y fue caracterizado empleando técnicas de difracción de rayos-X y Microscopía Electrónica de Barrido (MEB) y mediante análisis de imágenes se determinó el tamaño promedio (mm2) y la forma de las partículas. La pintura refractaria empleada para inhibir la OI fue preparada mezclando polvos de TiB2, SiC y gel sílica coloidal a un pH de 9,8, la cual fue aplicada sobre una de las superficies de la muestra antes de iniciar el tratamiento térmico
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have